Sonic Blue 4500 - Manual (Page 12)

6
Re
p
lay
TV
45
00
Turning on ReplayTV
1 Press the ReplayTV POWER button on the ReplayTV remote control.
Or
2 Press the POWER button on the ReplayTV front panel.
Putting ReplayTV in Standby Mode
ReplayTV is in standby mode when it is plugged in with the power turned off. ReplayTV will record even if it is in standby mode.
1
Press the ReplayTV POWER button on the remote control.
Or
2 Press the POWER button on ReplayTV front panel.
:: About Service Activation
There is a one-time service activation fee for you to use your new ReplayTV 4500 Series Digital Video Recorder (“ReplayTV”).
Only the ReplayTV unit containing the serial number that you register is paid for and activated through this process. Other
ReplayTV units will require separate activation fee payments.
There is a grace period after your initial connection to the ReplayTV Service, during which time you can use ReplayTV without
having to activate the service. If you do not complete the service activation process and pay the service activation fee, your
ReplayTV will cease to operate until the service is activated and the fee is paid. Please activate your service before the grace period
expires.
An activation key for your ReplayTV will be displayed during the on-screen setup process. To activate the service and pay the acti-
vation fee, have the activation key ready and call 1-800-480-7149, or go to our Web site: www.sonicblue.com/replaytv