Sansui HDLCD2600 - Manual (Page 14)

14
Connections to other equipment
To connect the LCD TV to a DTV receiver/set-top box
If you connect a DTV receiver/set-top box, connect your LCD TV to a DTV receiver/set-top box using a compo-
nent video cord.
Y
P
B
P
R
To Component OUT
To Audio OUT
Audio cord (not supplied)
Video cord (not supplied)
Left Side of the LCD TV
To COMPONENT IN
To AV2 AUDIO (L/R) IN
To connect the LCD TV to an HDMI or a DVI device
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
Audio cord (not supplied)
HDMI cable (type A connector)
(not supplied)
To DVI output
To HDMI out
The HDMI input receives digital audio and uncompressed video from an HDMI device or uncompressed digital
video from a DVI device.
When you connect to a DVI device with an HDMI-to-DVI adapter cable, it transfers only the video signal. Sepa-
rate analog audio cords are required.
NOTE:
• If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using a DVI to HDMI
cable, the image will not display if the output resolution of the component is set to 480i. To receive the picture
you must change the output resolution on the external component.
Should you require further instruction, please contact the manufacturer of the external component.
Left side of the LCD TV
or
HDMI device
DVI device
To PC/HDMI
AUDIO IN
To HDMI IN
33S0101A_En_p12-17 7/23/07, 3:14 PM 14