Sansui HDLCD2600 - Manual (Page 25)

25
Setting the V-Chip
1
Press MENU. The menu
screen will appear.
Press
▲ or ▼ to select
“Feature” menu, then
press .
2
Press ▲ or ▼ to select
“Password Set”, then press
or ENTER.
3
Use Number buttons (0-9)
to enter your password
(The factory default
password is “0000”).
4
Select and enter a password
(4 digits) using Number
buttons (0-9).
5
Enter the same password
again to confirm.
The password is now
registered.
To register a password
An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that
you may choose to exclude. The restriction applies to “TV RATING” and “MPAA” if this data is transmit-
ted. You may set this restriction separately. To use the V-Chip function, you must register a password.
NOTE:
• If you forget the password,
contact Customer Service at 1-
800-289-0980 for assistance.
Your original remote control will be
required.
• To avoid forgetting the password,
write it down and keep in a safe
place.
“ ” appears instead of the number.
Enter New Password
Confirm New Password
Enter Old Password
Setup
Audio
Feature
Picture
Sleep Timer Off
Advanced Video Menu
Password Set
Parental Control
NTSC CC Off
ATSC CC Off
Digital Closed Caption
To Move To Select To Exit Enter Menu
Setup
Audio
Feature
Picture
Sleep Timer Off
Advanced Video Menu
Password Set
Parental Control
NTSC CC Off
ATSC CC Off
Digital Closed Caption
To Move To Select To Exit Enter Menu
33S0101A_En_p25-29 7/23/07, 3:15 PM 25