Sansui HDLCD2600 - Manual (Page 39)

39
Example: Adjust the H-Pos in the component mode.
1
Press INPUT SELECT repeatedly to select the component
mode.
2
Press MENU during the
component mode. Then press
▲ or ▼ to select “Feature”
menu, then press .
3
Press ▲ or ▼ to select
“Component Set”, then press
or ENTER.
4
Press ▲ or ▼ to select
“H-Pos”, then press or
ENTER.
5
Press or to adjust the
setting.
•
Press
▲ or ▼ to change the
adjusting item.
You can adjust to optimize the
performance of the TV in the
Component and PC mode.
C o m p o n e n t s e t t i n g - 7 2 0 x 4 8 0 p @ 6 0 / 5 9 . 9 4 H z
H-Pos 48
V-Pos 48
Clock 50
Phase 50
Auto Adjust
Setting
To Move To Select To Exit Enter Menu
Preset
H-Pos: To adjust the horizontal position of the
image on the Component or PC mode.
V-Pos: To adjust the vertical position of the
image on the Component or PC mode.
Clock: To minimize any vertical bars or stripes
visible on the screen background.
Phase: This must be adjusted after the frequency
of the Component or PC mode has
been set to 60hz to optimize picture
quality (page 16).
Auto Adjust
(PC Setting only):
To optimize “H-Pos”, “V-Pos”, “Clock”
and “Phase” automatically.
Setting: To return your settings to the factory
settings.
6
Press MENU to return to the normal screen.
NOTE:
• If no buttons are pressed for more
than approx. 30 seconds, the Menu-
screen will return to normal Monitor-
screen automatically.
• The “Component Set” and “PC Set”
settings are not effective for other
input modes.
H-Pos 48
Picture control adjustment in the Component and PC mode
Sleep Timer
Advanced Video Menu
Component Set
Setup
Audio
Feature
Off
Picture
To Move To Select To Exit Enter Menu
Sleep Timer
Advanced Video Menu
Component Set
Setup
Audio
Feature
Off
Picture
To Move To Select To Exit Enter Menu
33S0101A_En_p36-39 7/23/07, 3:15 PM 39