Symbol Technologies QRG PDT 8100 - Manual (Page 11)

9
Q u i c k R e f e r e n c e
Charging the Battery Using the Serial/Charging Cable
15-Pin Serial Port Connector
To connect to the Micro-D RS-232 port at the top of the terminal, use an
ITT Cannon brand mil-spec connector (MDM-15SSB) with captivated jack
screws (mil p/n M83513/5-6) to protect the connector’s contacts from
damage during insertion and removal.
Attaching the Trigger Handle
(“Quick Grip” compatible terminals only)
For information about attaching and using the scanning Trigger Handle,
refer to the TRG 8100 Trigger Handle Quick Reference Guide
(p/n 72-55949-xx). Please note that the trigger handle does not ship with
the terminal.
1. Insert the battery
charging receptacle
into the bottom of the
terminal.
2. Plug the power cable
into a wall outlet.
3. Plug the other end of
the power cable into
the battery charging re-
ceptacle.
Serial/Charging Cable
Battery charging
receptacle
6598801a.fm Page 9 Monday, December 8, 2003 2:01 PM