Symbol Technologies QRG PDT 8100 - Manual (Page 18)

16
P D T 8 1 0 0 S e r i e s
w i t h W i n d o w s M o b i l e
2 0 0 3 f o r P o c k e t P C s
Key Action
Note:
1. Press Func, then another key to produce the value or function above that
key. See individual key descriptions in this table for additional Function key
usage.
2.Press Func + Ctrl + Clear to close applications.
Alpha Press Alpha to toggle between alpha and numeric
mode. In alpha mode, pressing a key produces the yel-
low letter on that key; in numeric mode, pressing a key
produces the number in gray or character in white.
Backlight See Controlling the Backlight on page 11 .
Caps/Shift Press Shift when in alpha mode, then another key to
capitalize the letter on that key.
Press Func + Shift to toggle All Caps on and off.
Clear Press Clear to generate an Escape key. This is applica-
tion dependent but typically closes a window or clears
the screen.
Cursor keys:
C, G, H, I Press Func + a cursor key to move the cursor up, down,
left, and right on the screen.
End Press End to generate an End key. This is application
dependent but typically moves the cursor to the end of a
line
Enter/Escape Press Enter after entering data or a command.
Press Func + Enter to generate an Escape key. This is
application dependent but typically closes a window or
clears the screen.
Power See Starting the Terminal on page 10 .
Scan Press Scan to scan bar codes. (Also use right and left
scan triggers.)
Send The Send key is application dependent.
Space/Back-
space Press Func + Bk-Sp to enter a blank space.
Press Bk-Sp to erase information entered on the display,
one character at a time.
Tab Press Tab to generate a Tab key. This is application de-
pendent but typically moves the cursor from field to field.
6598801a.fm Page 16 Monday, December 8, 2003 2:01 PM