Symbol Technologies QRG PDT 8100 - Manual (Page 16)

14
P D T 8 1 0 0 S e r i e s
w i t h W i n d o w s M o b i l e
2 0 0 3 f o r P o c k e t P C s
Key Action
Note:
1. Press Func, then another key to produce the value or function above that
key. See individual key descriptions in this table for additional Function key
usage.
2.Press Func + Ctrl + Clear to close applications.
Alpha Press Alpha to toggle between alpha and numeric
mode. In alpha mode, pressing a key produces the yel-
low letter on that key; in numeric mode, pressing a key
produces the number in gray.
Backlight See Controlling the Backlight on page 11 .
Caps/Shift Press Shift when in alpha mode, then another key to
capitalize the letter on that key.
Press Func + Shift to toggle All Caps on and off.
Clear Press Clear to generate an Escape key. This is applica-
tion dependent but typically closes a window or clears
the screen.
Cursor Press cursor keys to move the cursor left, right, up and
down on the screen.
Press Func + up cursor to raise the volume.
Press Func + down cursor to lower the volume.
End Press End to generate an End key. This is application
dependent but typically moves the cursor to the end of a
line
Enter/Escape Press Enter after entering data or a command.
Press Func + Enter to generate an Escape key. This is
application dependent but typically closes a window or
clears the screen.
Power See Starting the Terminal on page 10 .
Scan Press Scan to scan bar codes. (Also use right and left
scan triggers.)
Send The Send key is application dependent.
Space/Back-
space Press Func + Bk-Sp to enter a blank space.
Press Bk-Sp to erase information entered on the display,
one character at a time.
Tab Press Tab to generate a Tab key. This is application de-
pendent but typically moves the cursor from field to field.
6598801a.fm Page 14 Monday, December 8, 2003 2:01 PM