Sharper Image S1570 - Manual (Page 12)

Always unplug the unit and empty the water tank when not in
use. Never store the Steam Wizard with water in the tank or
plugged in to a power outlet.
1. Disconnect the Steam Wizard from the wall socket before
filling the water tank.
2. Press the TANK RELEASE TAB to remove the tank for filling.
3. Remove the water tank cap by twisting it counterclockwise.
4. Slowly pour unheated water into the opening. Leave at least
1/2 inch of air space in the water tank.
5. Replace the water tank cap by twisting clockwise until it
resists. Do not overtighten. The cap will “lock” into place as
indicated by the diagram next to the opening of the tank.
6. Return the water tank to the main housing.
Filling the Water Tank
12
SI570 IM_v1 1204 1/20/05 3:43 PM Page 12