Sharper Image S1570 - Manual (Page 18)

Clean after each use or when the collection chamber becomes
full. The water tank must be emptied before the unit is stored.
1. Disconnect the Steam Wizard from the wall socket and hold
the unit over a wastebasket, pointing the nozzle down.
2. Release the locking tab located at the rear of the chamber.
Pull the chamber away from the unit.
3. Remove and clean the internal parts.
4. Empty the chamber by shaking it over a wastebasket. Rinse
the chamber and filter under running water to remove
remaining dirt.
5. Reassemble the unit to continue using the Steam Wizard. Once
cleaning is complete, the chamber and attachments should be
washed in warm soapy water before final reassembly and storage.
6. To empty the water tank, remove it from the main housing
and hold it over a drain. Remove the water tank cap and turn
the tank over to drain remaining water.
7. DO NOT overtighten the water tank cap when replacing it.
Tighten the cap only until resistance is felt and it cannot be
turned further without force.
Cleaning
18
SI570 IM_v1 1204 1/20/05 3:43 PM Page 18