Sharper Image S1570 - Manual (Page 16)

The tank must always contain water when operating in the
Steam or Spray mode. Always test a small area of carpet or
upholstery for color fastness before cleaning with water, steam
or cleaning solutions.
1. To activate the internal heating element, press the STEAM
or SPRAY button. Allow 30 seconds for the unit to begin
producing steam.
2. For stubborn stains, the SPRAY button can be pressed to
dilute the stain with hot water. Do not over-saturate the area.
3. Glide the nozzle over the stained area until the stain is loos-
ened. Excess dirt and water can be removed by pressing the
VACUUM button and gliding the nozzle over the area.
4. To turn the unit off, press the VACUUM button.
5. Do not allow the collection chamber to become too full.
6. When cleaning hard surfaces, use with the rubber squeegee
attachment inserted into the nozzle end of the Steam Wi z a r d .
7. When cleaning upholstery or other fabrics, use with the brush
attachment inserted into the nozzle end of the Steam Wi z a r d .
Steam or Steam Spray
16
SI570 IM_v1 1204 1/20/05 3:43 PM Page 16