Sharp MD-MT888H - Manual (Page 57)

01/8/30 6.fm
57
MD-MT888H
Ref
e
renc
es
-T
roub
le
shoot
ing-
„ If trouble occurs
When this product is subjected to strong external interfer-
ence (mechanical shock, excessive static electricity,
abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
„ Moisture condensation
When the unit has condensation inside, the disc signals
cannot be read, and the unit may not function properly.
In the following cases, condensation may form inside the
unit.
z Shortly after turning on a heater.
z When the unit is placed in a room where there is
excessive steam or moisture.
z When the unit is moved from a cool place to a warm
place.
To remove condensation:
Remove the MiniDisc and leave the unit for approxi-
mately 1 hour. The condensation should evaporate and
the unit will work properly.
Recording and editing are impossible.
z Is the MiniDisc protected against accidental erasure?
z Has the recording level been properly adjusted?
z Is the unit connected properly to the other equipment?
z Is the AC adaptor unplugged or did a power failure oc-
cur whilst recording or editing?
z Is the unit in the hold mode?
z Is an optical signal being output from the stereo sys-
tem? Read the operation manual for the stereo sys-
tem.
The battery cannot be charged.
z Is the rechargeable battery in the unit?
z Is the terminal dirty?
Group functions cannot be used with the group-re-
corded MD.
z TOC information may have been changed with other
equipment.
1. Unplug the AC adaptor from the wall socket.
2. Remove the battery.
3. Leave the unit completely unpowered for approxi-
mately 30 seconds.
4. Plug the AC adaptor back into the wall socket and re-
operate the unit.