The signal menu, The signal menu is used to adjust the input signal, Adjust signal...menu – Sony VPL-CS20 User Manual

Page 23

Advertising
background image

23

The Signal Menu

A

d

ju

s

tm

e

nt

s an

d Set

tin

g

s

U

s

in

g a M

enu

The Signal Menu

The Signal menu is used to adjust the input signal.

Note that if the projector is used for profit or for public viewing, modifying the original picture by
switching to the wide mode may constitute an infringement of the rights of authors or producers,
which are legally protected.

Sel:

Set:

Back:

Exit:

Picture

Signal

Function

Setup

Installation

Information

12

1344

H: 235 V: 34

Adjust Signal

Dot Phase:

Shift:

H Size:

Sel:

Set:

Exit:

Picture

Signal

Function

Setup

Installation

Information

Adjust Signal

Wide Mode:

Scan Converter:

Off

On

Adjust Signal...menu

Setting items

Functions

Initial setting

Adjust Signal...

Dot Phase

Adjusts the dot phase of the LCD panel and the signal
output from a computer.
Adjust the picture further for finer picture after the
picture is adjusted by pressing the APA key.

H Size

Adjusts the horizontal size of a picture output from a
computer. Adjust the setting according to the dots of
the input signal.
For details, see page 42.

Set according to
the input signal

Shift

Adjusts the position of the picture. H adjusts the
horizontal position of the picture.V adjusts the vertical
position of the picture. As the setting for H increases,
the picture moves to the right, and as the setting
decreases, the picture moves to the left.
As the setting for V increases, the picture moves up,
and as the setting decreases, the picture moves down.
Use the

b

or the

B

key to adjust the horizontal

position and the

v

and

V

key for the vertical position.

Set according to
the input signal

Wide Mode

Sets the aspect ratio of the picture.
Off: When a picture with a ratio of 4:3 is input.
On: When a picture with a ratio of 16:9 (squeezed) is

input from a DVD player.

Off

Scan Converter

Converts the signal to display the picture according to
the screen size.
When set to “Off,” displays the picture while matching
one pixel of input picture element to that of the LCD.
The picture will be clear but the picture size will be
smaller.

On

Note

Advertising