Sunbeam EM8910 - Manual (Page 12)

10
Heading Using the Sunbeam Intuitive Digital
Prior to switching on each time, make sure
there is water in the water reservoir and
replenish if necessary. As the machine
requires water for the automatic rinsing
cycles with each switching on and switching
off process.
Filling the machine
• Slide out and remove the water reservoir
from the machine. See figure 5.
• Fill the water reservoir always with fresh,
cold water. See figure 6.
Note: Fill only cold water into the water
reservoir. Never fill with other liquids, such
as mineral water or milk.
• Replace the water reservoir. Slide the water
reservoir in and press firmly into place to
ensure that the valve of the water reservoir
opens. See figure 7.
Note: If the water reservoir is not correctly in
position or if water needs to be refilled while
the espresso machine is in operation, the
water indicator illuminates and the display
indicates <<FILL WATER RESERVOIR>>.
Making coffee will not be possible or the
cycle will be interrupted.
Switching on the machine
• Turn the power on at the power outlet
and switch the espresso machine on
by pressing the ‘POWER’ button on the
control panel. See figure 8.
LCD: Indicates briefly
<<Sunbeam Intuitive>>
Figure 5
Figure 6
Figure 7
Figure 8