Symbol Technologies VRC 6940 - Manual (Page 35)

4-6
VRC 6940 Product Reference Guide
b. Data Bits: Select 7. The screen will look like this:
Figure 4-7. Setting Data Bits on the VRC 6940
c. Parity: Select Odd. The screen will look like this:
Figure 4-8. Setting Parity on the VRC 6940
d. Flow Control: Select Xon/xoff. The screen will look like this:
Figure 4-9. Setting Flow Control on the VRC 6940
6. When all parameters are set, the screen displays this message:
Program Loader
Start? <ENT>
7. Press ENTER to start the Program Loader.
Comm Parameters
Data Bits
7
Comm Parameters
Parity
Odd
Comm Parameters
Flow Control
Xon/xoff