Symbol Technologies VRC 6940 - Manual (Page 57)

6-12
VRC 6940 Product Reference Guide
13. Start the Memory Transfer. Make sure the Host PC is ready to receive data, and then
press ENTER on the VRC 6940. While memory data is transferring, the VRC 6940
displays a report of the 1 KB range being transferred. The screen updates for every
1024 bytes (1 KB) of memory.
Figure 6-9. Memory Transfer Status Screen
14. Check the transmission results. When the transmission has completed, a status screen
appears.
A status of 0000 (all zeros) indicates a successful transfer; any other value means that
the transfer failed. If the transfer failed, check the Memory Transfer and
communications settings and try the procedure again.
Figure 6-10. Status Screen when Memory Transfer is Complete
15. Press CLEAR to return to the Command Mode main menu.
Technical Support Contacts
If you cannot solve your technical problem with the information in this manual, contact
Symbol Technical Support for assistance. Refer to the section, About This Manual, for
Symbol Support telephone numbers.
Memory Transfer
Sending: 0D40
Memory Transfer
Status: 0000