Smeg DI912 - Manual (Page 14)

User instructions
49
The washing cycle will not take place if the dishwasher door is left open
or not properly closed.
TABLE FOR CERTIFICATION BODIES
Reference standard EN 50242
Reference program BIO
Load 12 place-settings
Type of detergent B
Amount of detergent 30 g
Rinse aid setting 5/6
3.2 Washing programs
Before starting a washing program make sure that:
x
The water supply tap is open.
x The correct amount of detergent has been added to the
dispenser.
x The baskets have been correctly loaded.
x The spray arms are able to rotate freely and without
obstruction.
x The dishwasher door is securely closed.
CANCELLING THE CURRENT PROGRAM
x To cancel the currently selected program, open the door and hold
down the PROGRAM SELECTION (3) button for a few seconds until
the indicator lights for programs 4 and 5 illuminate simultaneously.
x Close the door.
x After approximately 1 minute the dishwasher will advance to the end
of cycle.