Socket Mobile 10/100 - Manual (Page 9)

STEP 2: Install the Software
Follow these steps for software installation BEFORE inserting the 10/100
Ethernet CF Card:
1. Use a serial/Ethernet/USB cable or cradle to connect your mobile
computer to a host PC.
2. In order to synchronize data, there must be a partnership (not a guest
connection) between the mobile computer and host PC.
• If you already established a partnership between the two computers,
they should automatically connect and begin synchronizing.
• If no partnership exists between the two computers, a screen will
appear asking if you would like to set one up. Select Yes and click
Next>. Follow the remaining screens on your host PC until the
partnership has successfully been established.
IMPORTANT! You must set up a partnership (not
a guest connection), or you will not be able to
synchronize data between your mobile computer
and host PC!
3. Insert the Socket 10/100 Ethernet Installation Disc into the host PC.
CHAPTER 2: SETUP 7