Basic operation (continued), Sound volume – Sharp Aquos LC 20D30U User Manual
Page 20
18
Basic Operation (Continued)
Switching the Input Modes (INPUT1/
INPUT2/INPUT3/INPUT4/INPUT5(PC)/TV)
Turn on the power of the connected video equipment.
Press
INPUT to select the applicable input source. The
screen changes in order of INPUT1, INPUT2, INPUT3,
INPUT4, INPUT5 (PC) and TV mode each time
INPUT
is pressed.
INPUT3 mode
I N P U T 3
I N P U T 5
P C
INPUT5 (PC) mode
I N P U T 4
H D M I
7 2 0 P
INPUT4 mode
TV mode
2
I N P U T 2
I N P U T 1
7 2 0 P
INPUT2 mode
INPUT1 mode
A
• INPUT1:
Used for video equipment connected to the COMPONENT
input terminals.
• INPUT2:
Used for video equipment connected to the INPUT2
terminals.
The S-video input terminal is additionally provided for the
INPUT2 terminal. If both the S-video terminal and normal
video terminals are connected with cables, the S-video
input terminal takes priority.
• INPUT3/OUTPUT:
INPUT3 mode is used to adjust the preset settings and IN
or OUT can be selected. INPUT3 indication is not displayed
when OUT is selected. (For details on setting INPUT3
SELECT, see page
26.)
• INPUT4:
Used for video equipment connected to the HDMI input
terminal.
• INPUT5:
If you connect the PC to the PC-IN terminals, you can view
the PC image on the LCD TV set.
Sound Volume
■
To adjust the volume
●
Press
VOL (
+
) to increase the sound volume.
The bar indicator shifts right.
VOLUME
��5
0
●
Press
VOL (
–
) to decrease the sound volume.
The bar indicator shifts left.
1
0
VOLUME
■
To mute the sound
●
Press
MUTE to temporarily turn off the sound.
The MUTE mark
is displayed for 4 seconds.
●
Press
MUTE or VOL (
+
)/(
–
) to turn the sound back to
the previous level.
The mute function is automatically turned off when any
of the following buttons are pressed:
POWER, MUTE,
VOL(
+
)/(
–
) or MTS.
1
0
VOLUME
A
• When
VOL (
+
)/(
–
) is pressed in the Mute mode, the sound turns
on and the volume indicator is displayed.
• The Mute function is canceled when
POWER is pressed.
■
To select MTS (Multichannel TV Sound)
Press
MTS to display the MTS screen.
Press
MTS to select the MTS settings.
STEREO: stereo audio
SAP:
secondary audio program
MONO: monophonic audio
STEREO
SAP
MONO
<ON�AIR
<ON�AIR
A
• “ON AIR” appears when a STEREO or SAP broadcast is being
aired.
1
2
2
1
LC-20D30U_E_P15-20.indd 18
2005/12/21 19:27:14