Troubleshooting – Sharp Aquos LC 20D30U User Manual

Page 42

Advertising
background image

40

Troubleshooting

Before calling for repair services, make the following checks for possible remedies to the encountered symptoms.

Problem

Check item

Reference page

There is no

picture or

sound.

• Make sure the AC cord is properly inserted in the power

outlet.

• Reception other than those of broadcasting stations can

be considered.

• Make sure the input mode is set to TV.

• Make sure the POWER switch of the main unit is on.

10

18

17

There is no

picture.

There is no

picture from

INPUT1/2/3/4.

• Make sure the BRIGHTNESS is properly adjusted.

• Fluorescent lamp may have reached the end of service

life.

• Make sure the S-VIDEO terminal has nothing connected.

• Make sure the AUDIO ONLY is not set to ON.

22

42

14

34

There is no

sound.

• Make sure the volume is not set to minimum.

• Make sure the sound is not set to mute.

• Make sure that headphones are not connected.

18

18

11

There is no

picture or

sound, just

noise.

• Make sure the antenna cable is properly connected.

• Bad reception could be the problem.

9, 10

Picture is not

clear.

• Make sure the antenna cable is properly connected.

• Bad reception could be the problem.

9, 10

Picture is light

or improperly

tinted.

• Check color adjustment.

• Check COLOR SYSTEM setting.

22, 23

26

The picture is

too dark.

• Press the BACKLIGHT button or set the BACKLIGHT or

BRIGHTNESS settings.

• Check CONTRAST and BRIGHTNESS adjustment.

• Fluorescent lamp may have reached the end of service

life.

22

22

42

Remote control does not work.

• Check the batteries of the remote control.

• Make sure the remote sensor window is not in strong

lighting.

8

8

The clock (AUTO CLOCK) cannot

be set.

• The broadcasted EDS signal may be weak. Check the

antenna.

• Carry out EZ SETUP or Setting the CLOCK again.

• If EDS signal is not sent, set the clock using MANUAL

CLOCK Setting.

15, 16, 25

16

Unit cannot be operated.

• External influences such as lightning, static electricity,

etc., may cause improper operation. In this case,

operate the unit after first turning the power off, or

unplugging the AC cord and re-plugging it in 1 or 2

minutes.

Sound

Picture

Picture

LCD TV set

LC-20D30U_E_book.indb 40

2005/12/15 11:27:48

Advertising