Sharp Aquos LC 20D30U - Manual (Page 40)

38
Connecting a PC (Continued)
INPUT SIGNAL (for PC mode)
Select the computer input signal before displaying the PC
image on the LCD TV screen.
A
• Make sure to select the input signal to “1280 Ч 768”, “1024 Ч
768”, “800 Ч 600” or “640 × 480”, before connecting a PC.
Press MENU to display the Menu screen.
Press \/| to select “SETUP”.
Press '/" to select “PC SETUP”, and press ENTER.
SETUP�� �OPTION
C H � S E T U P
M T S
C L O C K � � � � � � �
I N P U T 3 � S E L E C T
V ﾐ C H I P � B L O C K
C L O S E D � C A P T I O N
C O L O R � S Y S T E M
H D M I � S E T U P
P C � S E T U P
L A N G U A G E
Press '/" to select “INPUT SIGNAL”, and press
ENTER.
Press '/" to select the desired input signal and
press ENTER.
0 0
0 0
0
0 0 0 0 0
0
0
� � 1 2 8 � x 7 6 8 ( 6 � H z )
� � 1 � 2 4 x 7 6 8 ( 6 � H z )
� � � 8 � � x 6 � � ( 6 � H z )
� � � 6 4 � x 4 8 � ( 6 � H z )
Press MENU to exit.
FINE SYNC. Adjustments (for PC mode)
You can adjust the PC image using the FINE SYNC. menu.
Repeat steps 1 to 3 of INPUT SIGNAL (for PC mode)
to display the PC SETUP screen.
Press '/" to select “FINE SYNC.”, and press ENTER.
Press '/" to select the specific adjustment item.
H . P O S . [ � � � ] ﾐ � � � � � � � � +
V . P O S . [ � � � ] ﾐ � � � � � � � +
C L O C K � [ � � � ] ﾐ � � � � � � � +
P H A S E � [ � � � ] ﾐ � � � � � � � +
R E S E T � � � �
0
0
0
0
Press \/| to adjust the item to the desired position.
Press MENU to exit.
A
• When resetting all adjustment items to factory preset values,
perform the following procedure.
1 Press '/" to select “RESET”, and press ENTER.
2 Press '/" to select “YES” and press ENTER.
3
1
2
1
4
5
5
4
6
2
3
Selected item Description
H.POS. Centers the image by moving it to the left or right.
V.POS. Centers the image by moving it up or down.
CLOCK Adjusts the clock frequency.
PHASE Adjusts the clock phase.
LC-20D30U_E_book.indb 38 2005/12/15 11:27:42