Spalding 21196804 - Manual (Page 9)

10/04 P/N 21196804
9
4.
1" (2.54 cm)
SIDE VIEW
Fill hole approximately 1/3
full with mixed concrete.
FIG. A
FLANGE
Insert ground sleeve assembly and center
in hole (FIG. A).
Note: Leave 1" below flange exposed
for drainage hill.
5.
IMPORTANT!:
CONTINUE ON TO NEXT STEP.
DO NOT WAIT FOR CONCRETE TO CURE.
PLAYING SURFACE
3.
Snap two halves of
ground sleeve (4)
together.
Insert and secure
bottom pole section
(3) into ground sleeve
(4) by tightening
ground sleeve cap (5).
NOTE: Flared end
goes inside ground
sleeve.
3
5
4
4
IMPORTANT!:
NOTE POSITION OF
FLANGE