Sangean WR-2 - Manual (Page 11)

10
GB
Wake to radio alarm
When the radio alarm is selected, the radio will turn on and play the
selected radio station. The radio alarm will sound for one hour unless
turned off by pressing the On/Off button. Pressing the on/off button
whilst the alarm is sounding will cancel the alarm for 24 hours.
1. When radio is off, press and release Display button will beep and
flash alarm icon and previous alarm time .
Note:
when the radio is on, press and release Display button until
display flashes alarm status .
2. During the flash, long press SET button until hour and minute
digits also alarm model flash in the display.
3. Press Hour and Minute button separately or rotary tuning control
to set required alarm time.
4. Press and release Select button to select radio alarm or radio
alarm + buzzer alarm, display will flash or .
5. Press Band button and rotary tuning knob to select required
radio station. You can also select alarm station by recalling the
preset stations pressing memory presets button.
6. Press and release Set button to complete radio alarm set.
Display will show radio alarm icon .
7. The volume level will be same as last radio station listening to.