Sangean WR-2 - Manual (Page 14)

13
Operating your radio AM
Connecting the antenna
The radio comes with built-in AM antenna which should be
enough for normal listening. To improve the AM reception,
you may connect the outdoor AM antenna with AM antenna terminal
(USA version only).
Tuning your radio
Your radio is equipped with three tuning methods – Scan tuning,
Rotary manual tuning and Memory preset tuning. When switch on
your radio will display the waveband and frequency in use.
Scan tuning
1. Press the power On/Off button.
2. Select the required waveband by repeatedly pressing the
band button.
3. Press and release Scan button, your radio will scan the selected
waveband and stop automatically when it finds a station of
sufficient strength.
4. Set volume control and tone control to the desired setting
(described later on volume and tone control)
5. To switch off your radio, press Power On/Off button.