Sangean WR-2 - Manual (Page 8)

7
Power your radio
AC operation
Before you plug the AC cord into the radio, be sure the AC voltage is
correct. Insert the plug on the end of the supplied power cord into the
AC power socket on the back of the radio .
DC operation
For outdoors use, you can power the radio by using 12V DC input
socket from a DC power supply (example, from the power supply of
vehicles or boats). An AC power adaptor with 1 Ampere and center
positive in polarity can also power the radio in house.
Operating your radio –
initialize radio setting and clock setting
1. The radio display will scroll “ RDS Setting “ when the radio is
connected to the mains supply or DC power supply.
2. The RDS (Radio Data System) setting requires approximate
one minute to search required RDS data from radio stations
for easier data read out.
3. You can skip the RDS setting by pressing and releasing the
power button once (recommended for non-RDS broadcasting
area). Display will show “ — — :— — “ for clock setting.