Sprint Nextel SP-515 - Manual (Page 11)

11
Telephone Operation
n Telephone Operation
MAKING AND RECEIVING A CALL
To make a call, lift the handset and press PHONE . When the PHONE indi-
cator lights steadily and you hear the dial tone, dial a phone number or
memory number (see “Memory Dialing” on Page 13).
To answer a call if the handset is on the base, simply lift the handset and begin your conversation. Or, if the
handset is away from the base, press
PHONE first. The PHONE indicator on the handset and the IN USE indi-
cator on the base light.
Note: If RINGER is set to OFF , you must press PHONE to answer a call.
To end a call, place the handset on the base or press PHONE The indicator turns off.
Notes:
² If you press PHONE to hang up and the phone does not disconnect, move closer to the base then press
PHONE again, or place the handset on the base.
² If you want to make a call but the handset is out of the base’s range, the handset beeps twice. Move the
handset closer to the base and try again.
SETTING THE HANDSET’S VOLUME
You can select any of three volume levels by repeatedly pressing VOL-
UME during a call. Three short beeps sound when the handset is at the
highest setting. If you press VOLUME again, the handset returns to the
lowest setting.
CHANGING THE CHANNEL
The SP-515 scans 25 channels (frequency pairs used between the base and the handset) and automatically
selects a clear channel each time you make or receive a call.
If you hear other conversations or excessive noise during a call, press
CHANNEL on the handset to select a different channel.
Note: If the handset is too far from the base, the channel might not change. Move closer to the base and try
again.
USING REDIAL
You can quickly redial the last number dialed. Simply lift the handset and
press
PHONE . When you hear the dial tone, press REDIAL .
PHONE
Indicator
Illustration of front of base
Illustration of handset
Illustration of handset
Illustration of handset