Sprint Nextel SP-515 - Manual (Page 21)

21
Remote Operation
Remote Commands
While playing messages:
Press: To:
0 Hear TAD On/Off status.
1 Play all messages. If no message is recorded, the TAD
says “No messages.”
2 Play new messages. If no new message is recorded,
the TAD says, “No new messages.”
3 3 Delete all played messages.
5 Stop message playback or recording.
7 Play currently selected announcement.
8 Hear date and time setting.
9 Hear TAD ring selection and remote access code set-
tings.
# Record a memo. When you finish, press 5.
0 Set the TAD to not answer calls: The TAD says “The
machine is off” and beeps twice.
Set the TAD to answer calls: The TAD answers after
10 rings and says “The machine is off” and beeps
twice. Press
0. The TAD says “The machine is on”
and beeps twice.
7 Record new announcement. After the TAD beeps,
speak your message. When you finish, press 5. The
TAD plays your new announcement and beeps twice.
8, then
follow voice
prompts
Set date and time.
9, then
follow voice
prompts
Change ring selection and remote access code.
Press: To:
3 Delete current message.
4 Replay message. Each time you press 4, the TAD
backs up one message. Or, hold down 4 to return to a
particular spot within a message and release it to
resume playback at that spot.
5 Stop message playback.
6 Skip to next message. Or, hold down 6 to skip to a par-
ticular spot within a message and release it to resume
playback at the spot.