Smeg C9GMXU - Manual (Page 3)

Important Safety Instruction
5
WARNING
- If the instructions contained in this manual are not followed precisely, a
fire or explosion may result causing property damage, personal injury
or loss of life.
- Disconnect from the electrical supply before installing. Before turning
the power ON, be sure that all controls are in the OFF position.
- Do not store or use gasoline or other flammable vapors, liquids or
materials near this or any other appliance.
NOTE: This range is manufactured for use with natural gas. To convert the appliance to LP/Propane
gas, see the instructions in the Gas Conversion Kit provided in the literature package.
The proper gas supply connection must be available. See "Gas supply requirements”.
In the State of Massachusetts, the following installation instructions apply:
- Installation and repairs must be performed by a Massachusetts qualified or licensed contractor,
plumber, or gasfitter.
- If using a ball valve, it shall be the T-handle type.
- A flexible gas connector, when used, must not exceed 3 feet.
NOTE: This range is NOT designed for installation in manufactured (mobile) homes or in recreational
vehicles (RVs).
DO NOT install this range outdoors.
WARNING
To reduce the risk of fire, electrical shock, personal injury, or property
damage when installing the range, some basic safety precautions must be
followed, including:
- Read all instructions
- Proper installation is your responsibility. Have a qualified technician install and ground this appliance
in accordance with these installation instructions.
- It is the responsibility of the installer to comply with installation information specified on the model/
serial ID plate. This plate is visibly located in the oven door frame and must not be removed.
CAUTION: To eliminate the risk of burns or fire caused by reaching over hot surface burners, do not
store items directly above the rangetop.