Samsung SID-500 - Manual (Page 10)

Operating Your Camera
COLOR CCD CAMERA User’s Manual 19 COLOR CCD CAMERA User’s Manual 18
MAIN SETUP MENU
CAM TITLE • OFF • ON
WHITE BALANCE • ATW(OUTDOOR) • AWC SET • MANUAL
BACKLIGHT • OFF • LOW • MIDDLE
• HIGH
MOTION DET • OFF • ON
FOCUS • MODE • ZOOM TRK
• ZOOM SPEED • D-ZOOM
• DISP ZOOM MAG • ZOOM POS INIT
• LENS INIT • END
EXPOSURE • BRIGHTNESS • IRIS • SHUTTER
• AGC • SSNR • SENS-UP
• END
SPECIAL • USER PRESET • PRIVACY • DAY/NIGHT
• SYNC • COMM ADJ • IMAGE ADJ
• END
RESET
EXIT
Menu Configuration RS-485 communication control
Connection
Using a RS-485 communication, it will be able to control the ZOOM/FOCUS and
OSD menu at the SAMSUNG TECHWIN System Controller or DVR.
(1) The case which it controls from the PC
Using a RS-485 converter, It connects to RS-485 control cable outside camera
and serial cable
EX) SERIAL PORT OF THE PC(COM1) — SERIAL CABLE -- RS-485 CONVERTER
-- RS-485 CONTROL CABLE
(2)The case which it controls from the DVR or System Controller
It connects the RS-485 control cable in the connection terminal of 485 control
boards which are connected with the DVR or System Controller.
Connecting to RS-485 Control Cable
• When you construct external control systems for a camera control, please use to
the SAMSUNG TECHWIN PROTOCOL or PELCO-D PROTOCOL.
• When you connecting to RS-485 control cable, please peel off the outer skin inside
the RS-485 control cable.
Notes
CONTROL CABLE SPEC
RED (TRX+) RS-485+
WHITE(TRX-) RS-485-
485 CONTROL BOARD CONNECTION TERMINAL RS-485 CONTROL CABLE
(+)CONNECTION TERMINAL RED (TRX+)
(-)CONNECTION TERMINAL WHITE(TRX-)