Sony STR-DN610 - Manual (Page 12)

12 GB
D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB03DES_STR-DN610-U2.fm masterpage: Left
STR-DN610
4-167-824-13(1)
Notes on using the SHIFT (O)
and TV (P) button
SHIFT (O) button
Press and hold SHIFT (O), then press the
button with pink printing that you want to use.
Example: Press and hold SHIFT (O), then
press ENTER (C).
TV (P) button
Press and hold TV (P), then press the button
with yellow printing to control the TV.
Example: Press and hold TV (P), then press
TV CH + (RM-AAU073 only) or PROG +
(RM-AAU075 only) (N).
To control the receiver
SHIFT
.
m M
> X x
SA-CD/
CD DMPORT TUNER
MENU
O
HDMI 2 HDMI 3 HDMI 1
ENTER
Name and function
B ?/1 b) (on/standby)
Turns the receiver on or sets it to standby mode.
Saving the power in standby mode
When “CTRL.HDMI” is set to “CTRL OFF”
(page 61).
C Input buttons (VIDEO 1 a) )
Selects the component you want to use. When
you press any of the input buttons, the receiver
turns on. The buttons are initial assigned to
control Sony components.
Numeric buttons c) (number 5 a) )
Presets or tunes to preset stations.
ENTER
c)
Enters the selections.
D D.TUNING
Enters direct tuning mode.
E MEMORY
Stores a station during tuner operation.
F DISPLAY
Views information on the display.
I AMP MENU
Displays the menu to operate the receiver.
J
Press V/v/B /b to select the settings, then press
to enter the selection.
L MENU/HOME d)
Displays the menu to operate the receiver.
. > X x
TV CH / PROG
TV
,V/v/B/b