Bi-amplifier connection – Sony STR-DN610 User Manual
Page 19
19
GB
D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB04CON_STR-DN610-U2.fm
masterpage: Right
STR-DN610
4-167-824-13(1)
Co
nn
ecti
on
s
a)
Notes on the SPEAKERS SURROUND BACK/
BI-AMP/FRONT B terminals connection.
– If you connect only one surround back speaker,
connect it to the L of this terminals.
– If you are not using surround back speaker, and
you have an additional front speaker system,
connect the additional front speaker system to
this terminals.
Set “SB ASGN” to “SPK B” in the SPEAKER
menu (page 65).
You can select the front speaker system you
want to use with the SPEAKERS button on the
receiver (page 31).
– If you are not using surround back speaker, you
can connect the front speakers to this terminals
using bi-amplifier connection (page 19).
b)
When you connect a subwoofer with an auto
standby function, turn off the function when
watching movies. If the auto standby function is
set to on, it turns to standby mode automatically
based on the level of the input signal to a
subwoofer, then sound may not be output.
Notes
• Before connecting the AC power cord (mains
lead), make sure that metalic wires of the speaker
cords are not touching each other between the
SPEAKERS terminals.
• After you have install and connect your speaker, be
sure to select the speaker pattern from SPEAKER
menu (page 63).
If you are not using surround back speakers,
you can connect the front speakers to the
SPEAKERS SURROUND BACK/BI-AMP/
FRONT B terminals using a bi-amplifier
connection.
Connect the jacks on the Lo (or Hi) side of the
front speakers to the SPEAKERS FRONT A
terminals, and connect the jacks on the Hi (or
Lo) side of the front speakers to the
SPEAKERS SURROUND BACK/BI-AMP/
FRONT B terminals.
Make sure that metal fittings of Hi/Lo attached
to the speakers have been removed from the
speakers. Not doing so may cause a
malfunction of the receiver.
After you have made the bi-amplifier
connection, set “SB ASGN” to “BI-AMP” in
the SPEAKER menu (page 57).
Bi-amplifier connection
ANTENNA
TV OUT
1
N
I
2
N
I
3
N
I
HDMI
ASSIGNABLE (INPUT ONLY)
ARC
TV
IN
OPTICAL
SAT/
CATV
IN
OPTICAL
DVD
IN
DIGITAL
COAXIAL
(ASSIGNABLE)
DMPORT
DC5V
0.7A MAX
PB
/
CB
PR
/
CR
Y
IN 3
IN 2
IN 1
MONITOR
OUT
COMPONENT VIDEO ASSIGNABLE (INPUT ONLY)
VIDEO
IN
VIDEO
IN
VIDEO
OUT
VIDEO
IN
MONITOR
VIDEO
OUT
AUDIO
IN
AUDIO
OUT
AUDIO
IN
BD
SAT/CATV
AUDIO
IN
AUDIO
IN
SA-CD/CD/CD-R
R
VIDEO 1
L
AUDIO
IN
AUDIO
OUT
AUDIO
OUT
TV
SUBWOOFER
L
R
R
L
FRONT A
CENTER
SURROUND
SPEAKERS IMPEDANCE USE 8-16
Hi
Lo
Hi
Lo
Front speaker
(Right)
Front speaker
(Left)