Sony STR-DN610 - Manual (Page 80)

80 GB
D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB09REM_STR-DN610-U2.fm masterpage: Left
STR-DN610
4-167-824-13(1)
Digital (Optical) S/N: 100 dB
(A, 20 kHz LPF)
Output (Analog)
AUDIO OUT Voltage: 500 mV/
10 kohms
SUBWOOFER Voltage: 2 V/1 kohm
Equalizer
Gain levels ±6 dB, 1 dB step
3) INPUT SHORT (with sound field and equalizer
bypassed).
4) Weighted network, input level.
FM tuner section
Tuning range 87.5 MHz – 108.0 MHz
Antenna (aerial) FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Antenna (aerial) Loop antenna (aerial)
Intermediate frequency
450 kHz
Video section
Inputs/Outputs
Video: 1 Vp-p, 75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p, 75 ohms
P
B /C B : 0.7 Vp-p, 75 ohms
P
R
/C
R
: 0.7 Vp-p, 75 ohms
80 MHz HD Pass Through
General
Power requirements
Power output (DIGITAL MEDIA PORT)
DC OUT: 5V, 0.7A MAX
Power consumption
Dimensions (width/height/depth) (Approx.)
430 mm × 157.5 mm ×
325.3 mm (17 in × 6 1/4 in
× 12 3/4 in) including
projecting parts and
controls
Mass (Approx.) 7.8 kg (17 lb 4 oz)
Design and specifications are subject to
change without notice.
Area code Tuning scale
10 kHz step 9 kHz step
CA2 530 kHz –
1,710 kHz 531 kHz –
1,710 kHz
CEK, ECE – 531 kHz –
1,602 kHz
Area code Power requirements
CA2 120 V AC, 60 Hz
CEK, ECE 230 V AC, 50/60 Hz
Area code Power consumption
CA2, CEK, ECE 240 W
For details on the area code of the
component you are using, see page 3.
• Standby power consumption: 0.3 W
• Halogenated flame retardants are not used
in the certain printed wiring boards.