Smeg SNZ91MFX User Manual
Smeg Radio
Advertising
Table of contents
Document Outline
- 1. Instructions for proper use
- 2. Disposal instructions - Our environment policy
- 3. safety precaution
- 4. INTENDED USE OF THE APPLIANCE
- 5. KNOW YOUR COOKER
- 6. before first use
- 7. USE OF THE HOB
- 8. Front control panel
- 9. USE OF THE OVEN
- 10. AVAILABLE ACCESSORIES
- 11. ELECTRONIC PROGRAMMER
- 12. CLEANING AND MAINTENANCE
- 13. EXTRAORDINARY MAINTENANCE
- 14. PROBLEMS AND CAUSES
- 15. INSTALLATION OF THE APPLIANCE
- 15.1 Electrical connection
- 15.2 Gas connection
- 15.3 Room ventilation
- 15.4 Clearance above and around domestic cookers
- 1 Requirement 3 does not apply to a freestanding or elevated cooking appliance which is designed to prevent flames or the cooking vessels from extending beyond the periphery of the appliance.
- 2 The ‘cooking surface area’ is defined as that part of the appliance where cooking normally takes place and does not include those parts of the appliance containing control knobs.
- 3 For definition of hob, see Clause 1.4.64.
- 4 For definition of trivet, see Clause 1.4.109.
- 5 Consideration is to be given to window treatments when located near cooking appliances. See Clause 5.3.4.
- 16. ADAPTATION TO DIFFERENT TYPES OF GAS
- 16.1 Replacement of nozzles on the hob
- 1 Extract the grids and remove all the caps and flame-spreader crowns;
- 2 Unscrew the burner nozzles with a 7 mm socket wrench;
- 3 Replace the nozzles according to the type of gas to be used and the description in paragraph "16.2 Burner and nozzle characteristics table ";
- 4 Replace the burners in the correct position.
- 16.2 Burner and nozzle characteristics table
- 16.3 Arrangement of the burners on the hob
- 16.1 Replacement of nozzles on the hob
- 17. FINAL OPERATIONS