Controls – Snapper 1300 Series User Manual
Page 10
CONTROLS
REF
NAME
FUNCTION
A
Engine Speed Control Lever
Controls engine speed.
Headlight Switch
Push forward to turn headlight on, pull back to turn headlight off.
C
Traction/Mower Transport Lever
Raises
for transport. Pull back slightly to transfer weight of mower deck
onto front drive wheels for additional traction.
D
Ground Speed Control Lever
Controls ground speed and forward reverse motion. Push forward to go forward,
pull back to go in reverse. Ground speed is controlled by how far lever is in
forward or reverse gate.
E
PTO (Electric Clutch) Switch
Controls PTO for mowing. Pull up and push forward to engage mower. pull
backwards to
Activates PTO light
F
Oil Pressure Light (Red)
Indicates low oil pressure when engine is running. Lights up with ignition key
turned on and should go out immediately after engine starts.
G
Mower Height Adjustment Lever
Controls height of mower cut. Seven cutting height positions from 1
to 4”.
Place in forward slot for lowest cut.
Figure 2. Controls
6