Snapper 1300 Series - Manual (Page 18)

Operation
Figure 14. Release Lever Engaged
A. Release Lever
Plunger
C. Bracket
PUSHING THE RIDER BY HAND
To push the rider by hand, the hydro release valve must
be engaged so plunger on front of the transmis-
sion is depressed (figure 14). To drive the rider, the
release valve must be disengaged (figure 15).
See figure 14. To engage the release lever (A), pull
the lever toward the left to clear pump bracket (C),
then flip it up so the lever depresses the plunger.
Figure 15. Transaxle Release Lever Disengaged
A. Release Lever
B. Plunger
C. Bracket
2. See figure 15. To disengage the release lever, pull
the lever toward the left, then flip it down. Push the
lever towards the right to secure it into
14