Battery, Insert battery, Charge battery – Siemens SL45 User Manual

Page 10

Advertising
background image

25.4.01

u35gb.fm

U35 /SL45- English, A31008-H4800-A2-3-7619

8

Battery

Insert battery

• Insert battery at the bottom of the

phone

n

and press inward until it

clicks into place

o

.

• Switch off the phone before you

remove the battery.

• Unlock battery

o

, then remove

n

.

Charge battery

• The battery is not fully charged

when delivered, so:

• Interconnect the socket and the

Sync Station

n

with the plug-in

power supply.

• Insert the phone into the Sync

Station

o

and press downward

until it engages. The contact mes-
sage is displayed (alternatively:
plug in power supply directly to
the phone).

n

o

o

n



The voltage indicated on the
Sync Station must not be
exceeded.

Charging
The charger heats up when used for long
periods. This is normal and not dangerous.

5

When charging is in progress.

F

End of charging

An empty battery is fully charged after
about 2 hours. Charging is only possible in
an ambient temperature of 5°C to 40°C
(the charge icon flashes as a warning when
the temperature is 5°C above/below).

Usage time
A fully charged battery provides 60 to 170

hours of standby time or 1½ to 4 hours of
talk time. The standby times/talk times are
average values; the actual values depend
on the operating conditions (see table
below).

Charge level display:

Fully

B

C D

Empty

charged

A beep sounds when the battery is nearly
empty.

Operation
carried out

Time
(min)

Decrease of
standby time

Calling

1

30 - 60 min.

Playing music

30

20 - 30 h.

Display
backlight*

½

30 min.

Network search

1

5 - 10 min.

*Key input, games, organizer etc.

Advertising