Fact or y settings – Philips Saeco Presso SUP021YTDR User Manual

Page 18

Advertising
background image

18 DISPLAY MESSAGES - NOTES ON THE AQUA PRIMA CARTRIDGE FILTER

FACTOR.SETTINGS*

ENERGY SAVING

FACTOR.SETTINGS

NO

FACTOR.SETTINGS

YES

With this function you can restore the machine operating

parameters to the original settings set by the manufacturer.

If you restore all the factory settings, all customized

settings will be lost and you will need to reprogram them

if so desired.

Choose whether to restore

the initial factory settings.

FACT

OR

Y

SETTINGS

When the function appears,

select it using the “M” button.

Press the “M” button to

confirm your choice:

ENERGY SAVING

DESCALING

READY FOR USE

FILL WATERTANK

COF BEANS EMPTY

READY FOR USE

DREGDRAWER FULL

BREW UNIT MISS.

INSERT DREGDRAW.

TRAY MISSING

CLOSE DOOR

BREWUNIT BLOCKED

GRINDER BLOCKED

Messages are displayed to guide users through the usage of the machine correctly.

Press “M” .

Descale the machine.

Fill the water tank with fresh water.

Fill the coffee bean container and press the desired

coffee button to start the brewing cycle.

Remove the dregs drawer / waste box and empty out the

used coffee grounds.

Important note: the dregs drawer / waste box may be emptied only when the machine

is ON. The drawer must be removed for at least 5 seconds for the machine to read

that the drawer has been emptied. If you empty the drawer with the machine off, you

will not be able to dispense coffee the next time you switch the machine on.

Put the brew group properly in place.

Put the dregs drawer / waste box properly in place.

Put the drip tray properly in place.

Close the front door.

Contact an authorized service center.

ADDITIONAL INFORMATION FOR CORRECTLY USING THE “AQUA PRIMA”

FILTER.

Please follow these simple instructions to correctly use the “Aqua prima” filter:

1. Keep the “Aqua prima” filter cool and away from sunlight; the room temperature should

be between 41°F/+5°C and 104°F/+40°C;

2. Do not use the filter in temperatures over 140°F/60°C.

3. If the coffee machine is not used for 3 days, we recommend washing the “Aqua prima”

filter;

4 If the coffee machine is not used for more than 20 days, it is advisable to replace the

filter.

5. To store an already opened filter, seal it in a nylon bag and keep in the fridge; do not

store it in the freezer to avoid damaging the filter properties.

6. Before using the filter, leave it to soak in the water tank for 30 minutes.

7. Once it is taken out of its packaging, do not keep the filter in the open air.

8. The filter must be replaced 90 days after opening the package or after treating 13 gal-

lons/60 litres of water.

Advertising