Philips Saeco Presso SUP021YTDR - Manual (Page 3)

ENGLISH
3
GENERAL INFORMATION
This coffee machine is ideal for preparing espresso coffee either with coffee beans or
pre-ground coffee and also features a device for dispensing steam and hot water.
This elegantly styled machine is designed for household use only. It is not suitable
for continuous professional-type use.
Warning. The manufacturer shall accept no liability for damage or injury
caused by:
• improper use or use for other than the intended purposes;
• repairs carried out by anyone other than an authorized service center;
• tampering with the power cord;
• tampering with any machine component;
• use of spare parts and accessories other than those supplied by the
manufacturer.
• mineral or scale build up and/or freezing damage.
The warranty will be voided in such cases.
T
O FACILITATE INTERPRETATION
A warning triangle draws attention to the instructions that are impor-
tant for user safety. Please carefully abide by these instructions to
avoid serious injury!
This symbol is used to highlight information that is especially important for
ensuring optimal use of the machine.
H
OW TO USE THESE OPERATING INSTRUCTIONS
Keep these operating instructions in a safe place and make them available to
anyone else who should use the coffee machine. For further information or an
explanation of problems not completely or sufficiently addressed in these instruc-
tions, contact an authorized service center.
TECHNICAL SPECIFICATIONS
• Voltage rating
See rating plate on appliance
• Power rating
See rating plate on appliance
• Casing material
Metal
• Size (w x h x d)
10.3 x 14.2 x 17.2 inches - 260 x 360 x 436 mm
• Weight
26.5 pounds - 12 kg
• Cord length
47.2 inches - 1200 mm
• Control panel
Front (Digital)
• Water tank
67.5 oz - 2 lit. (Removable)
• Power supply
See rating plate on appliance
• Coffee container capacity
(2/3 lb) - (300 g) of coffee beans
• Pump pressure
15 bars
• Boiler
Stainless Steel
• Safety devices
Boiler pressure safety valve
safety thermostat
Subject to engineering and manufacturing changes as warranted by technological
developments.
Machine in conformity with European Directive 89/336/EEC (Italian Legislative
Decree 476 of 04/12/92) concerning electromagnetic compatibility.
The machine complies to American regulations (c UL us) FCC Part. 15 relative to
electromagnetic compatibility.