Samsung Digimax 250 - Manual (Page 28)

55 54
3. To ... Press „ or until you
select ...
Activate the option ON
Deactivate the option OFF
4. Confirm your choice by pressing .
Result: The phone goes back to the menu that you have just
selected.
/ OK
5. To exit the menu system, press . / I
Customising Your Phone’s Features
Your phone comes equipped with a set of preferences
that you can activate or deactivate as required.
Example: You want your phone to redial your last
number automatically if your call was
unsuccessful.
1. In Standby mode, press MENU to enter the menu system.
Result: The first menu appears.
2. To ... Press ...
Indicate that the call length 2, 1.
is to be displayed
Set the number of rings ◆ 2, 2.
before a call is answered ◆ „ or to select
automatically 3 Rings, 5 Rings,
7 Rings
or OFF
This selection does not require that you perform Step 3. Go
directly to Step 4.
Allow a call to be answered 2, 3.
by pressing any button
(except
)
Activate display backlighting 2, 4.
Allow the phone to beep 2, 5.
each minute whilst you are
on the phone
Allow automatic redialling 2, 6.
when a call is unsuccessful
Enable the flashing indicator ◆ 2, 7.
when the phone is in ◆ „ or to select
Standby mode If network or OFF
This selection does not require that you perform Step 3. Go
directly to Step 4.
/ I
03-250 4/2/99 11:27 AM Page 6