Servis-Rhino TURBO120 - Manual (Page 105)

ASSEMBLY
Turbo120 01/11 Assembly Section 3-7
© 2011 Alamo Group Inc.
ASSEMBL
Y
FRONT AND REAR DEFLECTORS (Standard Equip.) CHAINGUARDS
(Optional Equip. at Extra Cost)
Front and Rear Rubber-Fabric Deflectors are Standard Equipment and Front and Rear
Chainguards ar optional at extra cost. One type of guards must be installed (and maintained
in good repair) except for agricultural purposes only in areas where persons, vehicles,
livestock, or other property will not be endangered by thrown objects and where such safety
equipment would prevent the mower’s reasonable performance of its assigned agricultural
task.
DEFLECTORS: Front and Rear Deflectors (Standard Equipment) are recommended for the average user and
will provide protection from thrown objects with proper operation under normal conditions. Deflectors must be
maintained in good repair or replaced after no more than two inches of wear off lower edge.
Figure Asm-R-0293 & Asm-R-0294
Front Deflector - (FIGURE Asm-R-0293)
Attach the front Rubber Deflectors (1) to the
Mower with Bracket Straps (2), 1/2" x 1-1/4"
Bolts (7), Flatwashers (8) and Locknuts (6).
Rear Solid Skirt - (FIGURE Asm-R-0294)
Attach the rear Rubber Deflectors (1) to the
Mower with Bracket Straps (2) 1/2" x 1-1/4"
Bolts (4), and Locknuts (3).