Samsung SCC-C7435(P) - Manual (Page 62)

6 6
ZONE ID SET
This function is used to allocate as many as 12 IDs to each zone area. Use Left/Right/
UP/DOWN for this purpose. You may select the ID position from the additional menu of
[LOCATION...].
ZONE AREA SET0
LOCATION ...
ZONE ID SET ...
ZONE ENABLE ON
EXIT QUIT
ZONE AREA ID 0
A BCDEFGHIJKLMNOPQRSTUVWXYZ
012�456789 : ! - + * () /
RET
SP▶▶ ◀◀SP LOCATION...
Z ONE. 0......
ZONE ENABLE
This function turns [ON] or [OFF] the ZONE AREA ID indication.
SCC-C7433_7435-Eng.indd61 2008-05-20오전10:49:49