Smeg CR321A - Manual (Page 2)

Instructions for Use 58
Before Putting Into Use
• Before connecting the appliance to the mains supply, leave it stand
for about 2 hours, which will reduce a possibility of malfunctions in
the cooling system due to transport handling.
• Clean the appliance, and be thorough, especially in the interior (See
Cleaning and Maintenance).
• In case the interior accessories are not correctly placed, rearrange
them as described in chapter Description of the Appliance.
Instructions for Use
These instructions for use are intended for the user. They describe the
appliance and its correct and safe use. They were prepared for various
types/models of appliances therefore you may find in it description of
some functions and accesories that your appliance does not have.
Mounting Instructions
Integrated appliances are equipped with instructions for mounting the
appliance into the kitchen unit.
The appliance should be professionally mounted by qualified
technician and instructions are for his use only.
We Care for the Environment
• Our products use environmentally friendly packaging, which can be
either recycled or disposed of in an environmentally friendly manner.
To this end, individual packaging materials are clearly marked.
• These instructions are printed either on recycled paper or chlorine
free bleached paper.
• When your appliance finally wears out, please try not to burden the
environment with it; call your nearest authorised service agent. (See
Disposing of the Worn Out Appliance)
Tips for Energy Savings
• Try not to open the door too often, especially when the weather is
wet and hot. Once you open the door, mind to close it as soon as
possible. This is especially important if you have an upright model.
• Every now and then check if the appliance is sufficiently ventilated
(adequate air circulation behind the appliance).
• Set thermostat to lower settings as soon as possible (depends on
the amount of food loaded, ambient temperature etc).