Smeg CR321A - Manual (Page 20)

Mounting Instructions 11
Mounting Dimensions and Required Air
Circulation
The rear wall of the appliance is getting warm during the operation of
the appliance and water is evaporating from the drain pan on the
compressor. You must therefore provide for adequate air circulation on
the rear of the appliance.
• At the base of the kitchen unit intended for building in the integrated
appliance, there should be at least 200 cm² free space, for adequate
air circulation.
• On the upper part of the appliance the air is coming out, so try not to
cover the opening for the outflow air.
A (mm) B (mm) C (mm)
516 840 1446-1450
653 1033 1775-1780
846 840 1775-1780