Swiss Diamond IP10S - Manual (Page 32)

IP10S / IP10 user guide 31 02P182000Aen
Configuring user parameters
Setting parameters are divided into two categories:
- User settings: You can freely choose the setting options for the functions offered in this category.
Ringing tones, display language, display idle screen, headset capability, clock alarm, voice mail
number, password and reset are the customization possibilities.
- Administrator settings: rights to modify any of these parameters are reserved for your system
administrator. However, the Administrator’s setting options may be viewed at any time.
While configuring your phone, it is advisable to keep the receiver on the hook. If you lift the handset or
if you receive a call while you are configuring, the sequence will be interrupted.
Ringing tones
In the Ringing tones menu you can define the settings - melody, volume, rhythm – for internal and
external calls. You can choose from 10 melodies and even download polyphonic music in RTTTL
format (5 melodies) using the phone’s Web server (see "Configuring through a Web browser",
page 37).
Melody
In the Ringing tones main menu,
OK Select Melody by pressing the OK key.
OK Select Internal ring or External ring by pressing the OK key.
Use the Navigation keys to scroll in the melody list. Each melody is played.
OK
Select one melody by pressing the OK key.
Volume
In the Ringing tones main menu,
OK
Select Volume by pressing the OK key.
Use the Navigation keys to increase or decrease the volume.
OK
Confirm by pressing the OK key.