Viewing administrator parameters, Configuring user parameters – Swiss Diamond IP10S User Manual
Page 37
IP10S / IP10 user guide
36
02P182000Aen
Configuring user parameters
Clock setting
You can change the time settings if the time is not automatically given by the network.
Scroll up to
Clock
main menu and press the OK key.
OK
Scroll and select
Clock setting
by pressing the OK key.
OK
Select
Set time
by pressing the OK key.
Key in the time and save by pressing the OK key.
You also can choose the time format: 12h or 24h, and the time zone.
Date setting
You can change the date settings if this is not automatically set by the network.
Scroll to
Clock
main menu and press the OK key.
OK
Scroll and select
Date setting
by pressing the OK key.
OK
Select
Set the date
by pressing the OK key.
Key in the date and save by pressing the OK key.
You also can choose the date format: DD-MM-YY ; MM-DD-YY ; DD-MMM-YY.
Viewing administrator parameters
You have the option to view the technical and network parameters set by the system administrator, but
you can’t change them. See the list of parameters on page 30.
In the
Admin. settings
main menu,
OK
Select
Current settings
by pressing the OK key.
Scroll with the navigation keys to view each parameter.
OK
Press the OK key to go
Back
to the previous menu.