Smeg CE6IPX - Manual (Page 20)

Instructions for the User
51
12.4 Operating power settings
Below is provided a table with the maximum power consumptions of the burners.
Zone number: Zone Diameter Power consumed
1 145 mm
Normal operation: 1400 W
With power function: 1800 W
2 180 mm
Normal operation: 1850 W
With power function: 2500 W
3 210 mm
Normal operation: 2300 W
With power function: 3200 W
4 145 mm
Normal operation: 1400 W
With power function: 1800 W
Total power consumed 7400 W
12.5 Cookware
Appliances of this type require special cookware to be able to work. In fact, the cookware must have an
iron or steel/iron bottom to generate the magnetic field necessary for it to be heated up. Recipients made
of the following are not suitable:
- glass;
- ceramic:
- terracotta;
- steel, aluminium or copper without a magnetic bottom;
To see whether the pan is suitable, bring a magnet close to the bottom: if it is attracted, the pan is
suitable for induction cooking. If you do not have a magnet, you can put a small amount of water in the
recipient, place it on a cooking zone and start the burner. If, instead of the power symbol, the symbol
appears, it means the pan is not suitable. The pans used for cooking must have a minimum diameter to
guarantee proper functioning. Below is a table with the minimum diameters for pans according to the
cooking zone.
Zone number
Minimum cookware
diameter
Cookware that is larger than the cooking zones can also be used,
but care must be taken that the bottom of the pan does not come
into contact with other cooking zones and that it is always
centered on the cooking zone perimeter.
1 90 mm
2 145 mm
3 170 mm
4 90 mm