Smeg CE6IPX - Manual (Page 26)

Instructions for the User
57
14. EXTRAORDINARY MAINTENANCE
The oven may require extraordinary maintenance or replacement of parts subject to wear such as seals,
bulbs, and so on. The following instructions describe how to carry out these minor maintenance
operations.
Before performing any operations requiring access to powered parts, switch off the power
supply to the appliance.
14.1 Changing the light bulb
Remove the protective cover A by unscrewing it counterclockwise; replace the bulb B with another of the
same type (25 W). Re-fit the bulb protector A.
Use only oven bulbs (T 500°C).
14.2 Removing the door
Open the door completely and, using a small-
ended screwdriver rotate the hinges A
completely.
Grasp the door on the sides with both hands
near the hinges, close it forming an angle of
around 45° and remove it.
To reinsert it, groove B must be inserted with
the oven's frame, putting hinge A in the position
illustrated in the figure and pushing it all the way
in with one push using a screwdriver or
equivalent tool until you feel it click.
14.3 Removing the door seal
To permit thorough cleaning of the oven, the seal may be removed.
Before removing the seal, take off the door as described above. Once the
door has been taken off, lift the tabs under the seal as shown in the figure.