Smeg CE6IPX - Manual (Page 25)

Instructions for the User
56
13.6.2 Setting the cleaning cycle
Use PT2 to select the pyrolysis function ( ).
To start the cleaning (Pyrolysis) cycle, press the button to set its
duration. Press the or button to increase or decrease the
duration of the cycle from a minimum of 1h30m to a maximum of 3h
00m.
The word “Pyro” will appear on the display to indicate that the oven is
being cleaned and at the same time the remaining time will be shown
to finish the cleaning cycle.
One minute after the cleaning (Pyrolysis) cycle starts, an interlock device will be tripped, which prevents
opening of the door. The symbol lights up on the display to indicate that this interlock device has
been activated.
At the end of the cleaning cycle (indicated by a buzzer and by STOP on the display) the interlock device
will remain active until the temperature inside the oven has reached a safe temperature. When the oven
has cooled down, collect the residues from automatic cleaning with a damp micro-fibre cloth.
To select a cleaning cycle with delayed start, after setting the duration press again. The
symbol and the current time will appear on the display. By pressing the or buttons you can
select the time when you wish cooking to start.
A few seconds after the required duration is set, the and symbols stay on, and the oven will start
to wait for the starting time set for the cleaning cycle.