Samsung SCC-C4339P - Manual (Page 13)

English _13
English
4. Determine the type of power supply and set the POWER SELECTION switch
accordingly. Next, plug the power adapter into a wall outlet.
5. If the camera operates normally, the following screen will be displayed for
5 seconds and then disappears.
6. The requirements for RS485 control is as follows :
- Signaling Speed: 9600 bps
- Data Bit : 8 bits
- Stop Bit : 1 bit
- Parity Bit : none
SYSTEM INFO
TYPE 4_34 ZOM_WDR_P TYPE 4_34 ZOM_WDR_P
PROTOCOL SAMSUNG PROTOCOL SAMSUNG
ADDRESS
0 ADDRESS 0
COMM.TYPE
RS485,HALF COMM.TYPE RS485,HALF
BAUD RATE
9600 BAUD RATE 9600
CAMERA VER. V1.00_090817 CAMERA VER. V1.00_090817
LENS OK LENS OK
SCC-C4239P-TRK-ENG.indd 13 SCC-C4239P-TRK-ENG.indd 13 2009-10-9 9:31:47 2009-10-9 9:31:47