Samsung SCC-C4339P - Manual (Page 19)

English _19
English
AGC
With this, you can adjust the AGC level of a
camera.
With AGC active, if the signal strength falls
below the standard level, AGC will amplify the
video signal to automatically improve the
sensitivity.
If <SENS-UP> is set to <OFF> or <FIX>
mode, the <MOTION> menu will switch to
<AGC>.
With the USER (
) submenu selected, press
[ENTER] to display the corresponding screen.
In this mode, you can select from VERY LOW
to VERY HIGH in 16 levels, enabling deeper, wider choices to your convenience.
With the FIX (
) submenu selected, press [ENTER] to display the corresponding
screen. In this mode, you can select an individualized mode in 16 levels, regardless of
the brightness.
As long as the DAY/NIGHT menu is set to AUTO in Camera Setup, the AGC menu is
not available.
As long as FLICKERLESS is set to ON, the AGC mode is not available.
If you set BACKLIGHT to WDR, the AGC fi x mode is not available.
MOTION
You can specify a level of AGC for controlling the camera motion.
This is available only of the SENSE UP menu is set to AUTO.
Select F.FAST if you want to monitor a very fast moving object in a low contrast
scene, and S.SLOW if monitoring a very slow moving, inanimate object in the same
condition.
As long as DAY/NIGHT is set to <AUTO>, the <MOTION> menu is not available.
DNR
Reduces the noise on the camera image.
The higher the level is, the greater the effect is.
Set it to <USER> to specify the level.
M




W W CAMERA SET CAMERA SET X X
CAMERA ID OFF CAMERA ID OFF
VPS VPS OFF OFF
IRIS ALC IRIS ALC
AGC (VERY HIGH) ---
DNR MID DNR MID
SHUTTER
SHUTTER OFF OFF
SENS-UP SENS-UP OFF OFF
FLICKERLESS FLICKERLESS OFF OFF
XDR MID XDR MID
SCC-C4239P-TRK-ENG.indd 19 SCC-C4239P-TRK-ENG.indd 19 2009-10-9 9:31:47 2009-10-9 9:31:47