Siemens Gigaset 3000 - Manual (Page 71)

71
Code functions
Like other Hicom telephones, the mobile unit allows you to
perform the following functions by entering codes. The
codes in your system may deviate from the standard codes
specified here. Consult your system administrator if you
have any queries about the codes in your system.
* If activated (consult your system administrator if necessary)
** You can enter the codes that are valid for your system in this column.
Functions * Standard
code
System-
specific
code **
Call waiting/override ✱ 19
Do not disturb on/off ✱ 40 / #40
Call forwarding, variable
off
#44
Call number suppression
(no display)
✱ 5 / #5
Class of service
change/reset
✱ 18 / #18
Identification on/off
(before entering the PIN)
✱ 24 / #24
Tone dialling
(connection is set up)
✱ #
Callback request ✱ 9
Hunt group
exclude/include
✱ 13 / #13
Number redial (system)
– save
– dial
✱ 6
✱ 6
Call pickup ✱ 70
Speed dialling
individual/central
✱ 28 / ✱ 29